Mercure MBTS is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, SBR-NR / BR blends, NBR, IIR, EPDM, and other synthetic rubber based compounds used for the manufacture of motor cycles and scooter tyres, butyl tubes, cycle tyre and tubes, beltings, retreading materials, footwear, hot air cured products and miscellaneous molded and extruded products.
| TEST | NOMINAL VALUE | METHOD |
| Melting point initial (°C) | 164.0 Min. | ASTM D1519A |
| Melting point Final (°C) | 168 .0 Min | ASTM D1519A |
| Loss on drying 105°C / 2 hrs. (%) | 0.50 Max. | ASTM D 4571 |
| Ash Content 760°C/ 2 hrs. (%) | 0.30 Max. | ASTM D 4574 |
| Fineness though 100 mesh (%) | 99.90 Min | ASTM D 5461 |
| Assay (%) | 95.0 Min | ASTM D 5051 |
| Free MBT (%) | 2.0 Max | ASTM D 5044 |
| Oil Content (%) | 1.0 – 2.0 | In house method |
| ADDITIONAL INFORMATION | ||
| Specific gravity at RT | 1.45 – 1.55 (Typical Value) | ASTM D 1817 |
| Bulk Density (kg/m3) | 450 – 550 | In house method |
| Packaging: | Open mouth HDPE fabric bag with paper on the outside. 25 kgs.Net. | |
| Storage Life: | Two years from the date of production. | |
| Storage conditions: | Keep cool and dry in original packaging. | |
| Product Safety: | Relevant safety data and references as well as the necessary hazard warning labels can be found in the safety data sheet. | |
This information and our technical advice – whether verbal, in writing or by way of trials – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.
| TYPICAL DOSAGES OF MERCURE MBTS | |||||||
| Product | Rubber | Accelerator / Sulphur, phr | |||||
| MBTS | MBT | MBS | TMTD | ZDEC | S | ||
| Motor Cycle, Scooter Tyre Treads |
NR- SBR / BR |
1.0-1.2** | – | – | 0.1-0.2 | – | 2.2-2.75* |
| Auto Tubes | IIR BIIR |
0.3-0.4 0.5 |
– | – | 1.0 – |
0.0-0.2 0.10 |
1.5 0.5 |
| Cycle Tyre Treads Casing | NR-RR NR-BR NR |
0.8-1.0** 1.0-1.2** 1.0-1.2** |
– | – | 0.1-0.2 0.1-0.2 0.2-0.3 |
– | 2.2-2.5 2.2 2.5-3.0 |
| Conveyor Belt Cover | NR SBR |
0.80** 1.2-1.5** |
0.2 – |
– | 0.0-0.15 0.1-0.20 |
– | 2.75* 2.0 |
| Transmission Belts General Purpose Heat Resistant |
NR NR |
0.3 0.4 |
– | 0.8 – |
– 2.0-2.5 |
– | 3.0 0.3 |
| V Belts Base Cushion |
NR NR |
0.2 0.4 |
– | 0.6** 0.6** |
– | – | 3.0 2.4 |
| Retreading Materials Cushion-Hot Cure Cushion-Cold Cure Vulcanizing Solution |
NR |
0.2 |
– |
0.7** |
-TMTM 0.2 – |
– |
2.4* |
| Footwear DV Soles Microcellular Soles Neolite Soles |
NR-SBR NR-SBR NR-SBR |
0.7 0.6 0.7 |
0.3 – 0.3 |
– | 0.1-0.2 0.1-0.2 0.1-0.2 |
– | 2.2 2.2 2.5 |
| Hot Air Cured Products Rubberized Fabric & Rubber Sheeting |
NR | 0.4 | 0.4 | – | – | 0.3 | 2.5 |
| Cables | NR SBR |
1.0 1.6 |
– | – | TMTM 0.3 |
– | 1.2 1.0 |
| Misc. Molded and Extruded Products |
NR SBR NBR EPDM |
0.8-1.0 1.2-1.5 1.2-1.5 3.0 |
– | – | 0.0-0.2 0.0-0.2 0.0-0.2 0.75 |
ZDBC 1.5 |
2.4 2.2 1.5 0.5 |
| Mercure MBTS is also used in following compounds / products
– Chlorobutyl Inner Liner (Bias Tyres): MBTS-0.75 + Alkyl phenol disulfide-1.2 + ZnO 5.0 – Bromobutyl Inner Liner (Radials): MBTS-1.25 + ZnO-3.0 + S-0.4 – Bromobutyl OTR Tubes: MBTS-1.2 + TMTD-1.7 + ZnO-4.0 – Bromobuty l Tank Lining: MBTS-1.0 + TMTD-0.5 + ZnO-5.0 + S-0.5 |
|||||||
| Note: * Insoluble Sulphur (100% active content basis) ** PVI (Retarder) may be incorporated at 0.2-0.3 phr levels for desired scorch safety, ensuring compliance with vulcanizate properties. |
|||||||
Rubber Chemicals Accelerator | Rubber Antioxidant | Rubber Chemicals Antidegradants | Rubber Chemicals Liquid Retarder | Rubber Vulcanizing Agent | Rubber Chemical Peptizer | Rubber Processing Aids | Antitack Batch Off Powder | Dry Bonding Agent | Rubber Anti Reversion Agent | Chemical Intermediate & Floating Agents